Common problems of belt conveyor

Belt conveyor is the main mechanical tool in many engineering projects. Because there are many advantages in the process of transporting materials, it is favored in the process of grain in and out. However, belt conveyors have many problems during material transportation, such as belt deviation, spraying, etc., which have a great impact on its productivity. Today, we will talk about common faults and solutions when belt conveyors are running.

Analysis and treatment of abnormal noise and belt slippage

The noise produced when the roller is off-center. During operation, the drum is a device that easily generates noise and is accompanied by periodic vibration. The reason for the noise is that in the process of making the roller, the thickness of the smooth steel tube wall is uneven, which causes the roller to generate a large centrifugal force. On the other hand, during the processing of the roller, the center of the bearing hole and the center of the outer ring at both ends There has been a large deviation. In addition, large centrifugal force will be generated and abnormal noise will be generated.

To solve the problem of abnormal noise, first check the bearings on the belt conveyor. If the bearings are damaged, replace the bearings. If the bearings are not damaged, use other methods. The noise problem caused by the difference in the axial center of the coupling can be solved by appropriately adjusting the position of the motor reducer. The abnormal noise problem caused by the roller is usually caused by the damage of the bearing, just replace the bearing.

Belt conveyor is a relatively common machine in production and life. Because of the large transportation capacity and low power consumption, the advantages of being able to adapt to various materials are now widely used. However, the belt conveyor may also malfunction during operation. To solve these problems, it must be solved in an appropriate manner according to the cause of the problem.