Maintenance of wet mill

Prominer Shanghai Mining Equipment Factory has been established for a long time. It is a trustworthy unit. Our factory focuses on innovation and pursues quality first. The company has a large area and strong strength. All products adopt advanced production technology and modern Production equipment, the wet mill equipment produced is widely used in: grinding operations of ferrous metals, non-ferrous metals, non-metallic minerals, and grinding, selection and processing operations of precious metals gold and silver.

The protection and maintenance of various parts after the installation of the wet mill.

1.The protection of bearings. The length of the machine's bearing use time is mainly related to the smoothness of the machine. Generally speaking, the smoothness of the bearing is mainly in rolling bearings, roll bearings, gears, movable bearings, and sliding planes. The requirements must be guaranteed before smoothing. For the cleaning of smooth parts, the smooth structure must be cleaned to ensure that it can receive a better smoothing effect.

2.If the wheel tyre is a new device, it is easy to show the appearance of looseness. Therefore, the equipment protection personnel should always check the wheel tyre to prevent it from loosening and causing equipment damage.

3.Check the vulnerable parts of the machine frequently, and replace the parts in time if the wear of the vulnerable parts of the machine is found to be large. 4. Frequently clean the plane of the underframe. If the underframe encounters a lot of dust, it will affect the work of the machine and cause serious accidents. 5. Pay special attention to the oil temperature of the bearing when checking whether the various parts of the machine are working normally. If the bearing oil temperature rises, immediately close the machine to check the cause of the oil temperature rise.

4.If there is an impact sound when the rolling gear is working, immediately close the machine for investigation.

When the wet mill is in normal operation, people should not stand on top of the wet mill to work. Note that there should be no water seepage and water leakage on the electrical equipment. In addition, the lighting system must use a safe voltage of 36v, and the temporary lighting in the mill must also use 36v low-voltage lighting. The last thing to note is that when operators and maintenance personnel enter the mill, they must cut off the power supply and put up a warning sign prohibiting starting before they can enter the mill. When it needs to be energized for debugging, the maintenance personnel must leave the mill. No one is allowed to throw off the safety door lock at will. Refueling must be done when the equipment is stopped. Tools and objects must not be placed on the machine. The above are the matters needing attention when the wet mill is turned on. Please follow the correct steps. , To ensure the normal production of equipment.

To win the market with quality, brand to win trust, and perfect service to win customers' unanimous praise. Warmly welcome new and old customers to negotiate business with the factory and seek business opportunities together!