Operation essentials for maintenance personnel of wet mill

How to maintain the wet mill after installation? The full name of wet mill is wet mill. As a large-scale mechanical equipment, if you do not pay attention to maintenance after installation, the maintenance cost will be higher once the equipment is repaired, and its service life will be reduced. Therefore, when we use this equipment daily, we must pay attention to the daily maintenance of the equipment. Only if the maintenance work is done, the service life of the equipment will be prolonged and maintenance costs will also be saved. So, how should we maintain equipment to extend its service life?

1.Maintenance of bearings. The length of the machine's bearing use time is mainly related to the lubrication of the machine. Generally speaking, the lubrication of the bearing is mainly in the parts of the rotating bearing, roll bearing, gear, movable bearing, and sliding plane. Make sure before lubricating. The place that needs lubrication is clean, and the structure that needs lubrication must be cleaned to ensure that it can receive a better lubrication effect.

2.If the wheel tyre is newly installed, it is easy to loosen, so the equipment maintenance personnel should always check the wheel tyre to avoid damage to the equipment due to its looseness.

3.Frequently check the vulnerable parts of the machine. If you find that the vulnerable parts of the machine have a large degree of wear, replace the parts in time.

4.Frequently clean the plane of the bottom frame. If the bottom frame encounters more dust, it will affect the operation of the machine and cause serious accidents.

5.Pay special attention to the oil temperature of the bearing when checking whether the various parts of the machine are operating normally. If the bearing oil temperature rises, immediately turn off the machine and check the cause of the oil temperature rise.

6.If there is an impact sound when the rotating gear is running, immediately turn off the machine for investigation. The normal operation of the wet mill depends on the usual maintenance work, everyone

You can refer to the above points when performing equipment maintenance. Only if the maintenance work is done, the machine will work for you longer.